Gönderen: kkocaer | Mart 21, 2008

Tech tips:Network health check

Network checklist

  • No shared Ethernet segments are saturated (no more than 40 percent network utilization).
  • No shared Token Ring segments are saturated (no more than 70 percent network utilization).
  • No WAN links are saturated (no more than 70 percent network utilization).
  • The response time is generally less than 100 milliseconds.
  • No segments have more than 20 percent broadcast/multicast.
  • No segments have more than one cyclic redundancy check (CRC) error per million bytes of data.
  • On the Ethernet segments, less than 0.1 percent of the packets result in collisions.
  • On the Token Ring segments, less than 0.1 percent of the packets are soft errors that are unrelated to ring insertion.
  • On the Fiber Distributed Data Interface (FDDI) segments, there has been no more than one ring operation per hour that is not related to ring insertion.
  • The Cisco routers are not over-utilized (5-minute CPU utilization is no more than 75 percent).
  • The number of output queue drops has not exceeded 100 in an hour on any Cisco router.
  • The number of input queue drops has not exceeded 50 in an hour on any Cisco router.
  • The number of buffer misses has not exceeded 25 in an hour on any Cisco router.
  • The number of ignored packets has not exceeded 10 in an hour on any interface on a Cisco router.

  

Gönderen: kkocaer | Mart 21, 2008

Cisco router configuration scheduled update script

IOS konfigurasyonunun periyodik olarak FTP server’e update edilmesi :

 

ip ftp source-interface loopback 0

ip ftp username ftp_username

ip ftp password ftp_password

file prompt quiet

!

kron policy-list backup

cli copy running-config ftp://10.20.30.40

!

kron occurrence daily-backup at 0:30 recurring

policy-list backup

Gönderen: kkocaer | Mart 21, 2008

Cisco 3G GSM

Günümüzde wan teknolojileri hızla değişiyor ve bu değişimle artan ihtiyaçlara cevap vermek için farklı alternatifler sunuluyor.Cisco ISR serisi routerlarda kullanılan 3g destekli 3g-gsm-hwic kartları 2007 nin ağustos ayında son kullanıcıya sunulduğundan beri çeşitli amaçlar için kullanılmaktaydı.Remote access,wan backup ve mobil ofislerde kullanılabilmektedir.Bu yazımda Cisco 1841 serisi çift wic destekli ISR router ile gshdsl ve 3g kart yedeklilik çalışmasını anlatacağım.Henüz 3g lisansları Telekominikasyon kurumu tarafından operatörlerin işletmesi için verilmemiş durumda olmasına rağmen bu kart gelecek olan teknolojiyi de desteklemektedir.Yaptığımız testlerde de zaten EDGE bağlantısını görüyor olacağız.Gerekli donanım :Cisco 1841 ISR routerCisco 3g gsm hwic card

Cisco gshdsl wic card

Bu testler de peer gateway olarak 3. parti bir cihaz  ya da cisco da kullanılabilir.Ben test sırasında Juniper SSG serisini kullandım.Routing seçimini ise Gshdsl için OSPF , 3g card için ise floating static route kullanacağız.

İlk olarak cellular interfacin apn tanımlarını yapmamız gerekiyor;

Gönderen: kkocaer | Mart 21, 2008

Ospf

OSPF Types:Point to point

- dr bdr gerektirmez.

- ospf kurulacak interface i otomatik detect eder.

- ospf paketleri 224.0.0.5 den multicast olur.

Multiaccess networks:

- LAN da kurulan komşuluklardır.(ethernet bağlantısı)

- Dr bdr a hello paketlerini 224.0.0.6 dan gönderilir.

- Dr router floodingi 224.0.0.5 den yapar.

- priority yüksek olan DR olur,defaultta priority 1 dir,eşit priorityler olunca router id yüksek olan DR olur.0 priority seçime dahil olmaz.DRother olur hiçbirşey olmaz.

Tamamını Okuyun…

« Yeni Yazılar

Kategoriler